The 4.7” Lectum display is part of the drivers only platform. The display on-board electronics contains the source and the gate drivers.
Therefore, the evaluation kits have to provide the EPD controller, the power management, and the system MCU.
The 4.7” Lectum display is part of the drivers only platform. The display on-board electronics contains the source and the gate drivers.
Therefore, the evaluation kits have to provide the EPD controller, the power management, and the system MCU.
DISPLAY ELECTRONICS
EVALUATION KIT ELECTRONICS
The 4.7″ display can be operated by three main different evaluation kit systems:
MSP430 – KIT
The MSP430-Kit comes as complete kit and runs out of the box using different components. It consists of a TI MSP430 microcontroller on a Parrot board, a Raven 1 board and a Helios 1 connector board.
Complete Kit
MSP430 – SINGLE COMPONENTS
The MSP430-Kit comes as complete kit and runs out of the box using different components. For a deeper understanding of the single components they are listed below. All single components can be ordered separately.
MCU
Display specific reference board
Display connector board
Board
Parrot (Plastic Logic design)
Board
Raven 1 (Plastic Logic design)
Board
Helios 1 (Plastic Logic design)
Processor
TI MSP430F5438A
Design
Contains EPD controller, power management and RAM management
Design
Display connector
Operating system
None (µC unit)
EPD controller
EPSON S1D13524
Data exchange and extensions
JTAG programmer / SD
Identifier
M_T430E
Identifier
C_RV1
Identifier
B_H1
Product number
301008
Product number
301002
Product number
301018
BEAGLEBONE – KIT
The Beaglebone-Kit comes as complete kit and runs out of the box using different components. It consists of an ARM Cortex-A8 microcontroller on a Beaglebone board, a Falcon 2 board, a wire and a Hermes 4 connector.
Complete Kit
BEAGLEBONE – SINGLE COMPONENTS
The Beaglebone-Kit comes as complete kit and runs out of the box using different components. For a deeper understanding of the single components they are listed below. All single components can be ordered separately.
MCU
Display specific reference board
Wire
Display connector board
Board
Beaglebone black
Board
Falcon 2.1 (Plastic Logic design)
Wire
40-pin (Plastic Logic assembly)
Board
Hermes 4 (Plastic Logic design)
Processor
ARM Cortex-A8
Design
Contains EPD controller, power management and RAM management
Design
Wire between
Display specific reference board
and Display connector board
Design
Display connector
Operating system
Linux
EPD controller
EPSON S1D13524
Data exchange and extensions
USB / Ethernet / Serial / SD
Identifier
M_BBB (black)
Identifier
C_FN2.1
Identifier
W_40P
Identifier
B_HM4
Product number (black)
301004
Product number
301054
Product number
301053
Product number
301029
i.MX6 – KIT
The i.MX6-Kit comes as complete kit and runs out of the box using different components. It consists of a MCU board i.MX6SoloLite, a Hummingbird Z3.4 board, a wire and a Hermes 4 board. The MCU ARM Cortex-A9 is a system-on-chip (SoC) solution with the EPD controller integrated.
Complete Kit
i.MX6 – SINGLE COMPONENTS
The i.MX6-Kit comes as complete kit and runs out of the box using different components. For a deeper understanding of the single components they are listed below. All single components can be ordered separately.
MCU
Display specific reference board
Wire
Display connector board
Board
i.MX6SoloLite EVK
Board
HBZ3.4 (Plastic Logic design)
Wire
40-pin (Plastic Logic assembly)
Board
Hermes 4 (Plastic Logic design)
Processor & EPD controller
i.MX6SoloLite
Design
Contains multiple display power management and front light support
Design
Wire between
Display specific reference board
and Display connector board
Design
Display connector
Operating system
Linux
Data exchange and extensions
USB / Ethernet / Serial / SD
Identifier
M_i.MX6
Identifier
C_HBZ3.4
Identifier
W_40P
Identifier
B_HM4
Product number
301028
Product number
301038
Product number
301053
Product number
301029