The 15.4” Lectum display is part of the drivers only platform. The display on-board electronics contains the source and the gate drivers.
Therefore, the evaluation kits have to provide the EPD controller, the power management, and the system MCU.
The 15.4” Lectum display is part of the drivers only platform. The display on-board electronics contains the source and the gate drivers.
Therefore, the evaluation kits have to provide the EPD controller, the power management, and the system MCU.
DISPLAY ELECTRONICS
EVALUATION KIT ELECTRONICS
The 15.4″ display can be operated by one evaluation kit system:
i.MX6 – KIT
The i.MX6-Kit comes as complete kit and runs out of the box using different components. It consists of a MCU board i.MX6SoloLite, a Hummingbird Z3.4 board, two wires and two Hermes 3 boards. The MCU ARM Cortex-A9 is a system-on-chip (SoC) solution with the EPD controller integrated.
Complete Kit
i.MX6 – SINGLE COMPONENTS
The i.MX6-Kit comes as complete kit and runs out of the box using different components. For a deeper understanding of the single components they are listed below. All single components can be ordered separately.
MCU
Display specific reference board
Wire
Display connector board
Board
i.MX6SoloLite EVK
Board
HBZ3.4 (Plastic Logic design)
Wire
2 x 40-pin (Plastic Logic assembly)
Board
2 x Hermes 3 (Plastic Logic design)
Processor & EPD controller
i.MX6SoloLite
Design
Contains multiple display power management and front light support
Design
Wire between
Display specific reference board
and Display connector board
Design
Display connector
Operating system
Linux
Data exchange and extensions
USB / Ethernet / Serial / SD
Identifier
M_i.MX6
Identifier
C_HBZ3.4
Identifier
W_40P
Identifier
B_HM3.0
Product number
301028
Product number
301038
Product number
301053
Product number
301021