The 4.7” Lectum display is an active-matrix EPD with gate and source drivers supporting 800 x 450 pixels.
This display is particularly suitable for smartphone and logisticsapplications.
4.7″ Display
- Ultra-low power – no continuous refresh cycles required
- External EPD controller as well as power management required
- Evaluation kits available for driving images
- Can be combined with third-party touch solutions
| Resolution | 800 x 450 | |
| Active area | 103.68 x 58.32 mm (4.7″ diagonal) | |
| Pixel density | 196 ppi | |
| Bendability | typical 50 mm radius (except chip area) | |
| Gray levels | up to 16 | |
| Refresh rate | < 900 ms (16 gray-level) – faster for mono updates | |
| Surface | anti-glare / UV protection /hard-coat 2H | |
| Weight | 6 g | |
| Thickness | 670 µm | |
| EPD controller | external | |
| Operating conditions | 0°C to 50°C | 15 %rH to 85 %rH | |
| Storage conditions | -25°C to 50°C | 15 %rH to 85 %rH | |
| Display identifier for evaluation kits | S047_T2.1 |
Get all technical information for the 4.7″ display
Find out more about all available evaluation kits for the 4.7″ display
Need a different display size?
We have developed a range of display platforms based on different EPD controllers required to drive the respective Lectum design. Reference displays and evaluation kits, including software, are available. Please choose a platform or select custom design to discover how we can best support your display needs.