Magnifier_EvalKits

Evaluation Kits for the 10.7″ Display

The 10.7” Lectum display is part of the drivers only platform. The display on-board electronics contains the source and the gate drivers.

Therefore, the evaluation kits have to provide the EPD controller, the power management, and the system MCU.

DISPLAY ELECTRONICS

B_GateDriverYes
B_SourceDriverYes
B_EPDControllerNo
B_PowerManagementNo

EVALUATION KIT ELECTRONICS

C_EPDControllerYes
C_PowerManagementYes
C_SystemProcessor

    The 10.7″ display can be operated by three main different evaluation kit systems:

    • MSP 430-based
    • Beaglebone-based
    • i.MX6-based

    MSP430 – KIT

    The MSP430-Kit comes as complete kit and runs out of the box using different components. It consists of a TI MSP430 microcontroller on a Parrot board, a Raven 1 board, a wire and a Hermes 3 connector board.

    Complete Kit

    MSP430_RV1_HM3_2000x2000

    Identifier
    K_MSP430

    Product number
    303010

    MSP430 – SINGLE COMPONENTS

    The MSP430-Kit comes as complete kit and runs out of the box using different components. For a deeper understanding of the single components they are listed below. All single components can be ordered separately.

    MCU

    Display specific reference board

    Wire

    Display connector board

    DSC_1725_ParrotMSP430
    B_HM3.0

    Board
    Parrot (Plastic Logic design)

    Board
    Raven 1 (Plastic Logic design)

    Wire
    50-pin

    Board
    Hermes 3 (Plastic Logic design)

    Processor
    TI MSP430F5438A

    Design
    Contains EPD controller, power management and RAM management

    Design
    Wire between
    Display specific reference board
    and Display connector board

    Design
    Display connector

    Operating system
    None (µC unit)

    EPD controller
    EPSON S1D13524

    Data exchange and extensions
    JTAG programmer / SD

    Identifier
    M_T430E

    Identifier
    C_RV1

    Identifier
    W_50P

    Identifier
    B_HM3.0

    Product number
    301008

    Product number
    301002

    Product number
    301048

    Product number
    301021

    Function

    C_SystemProcessor

    Function

    B_EPDControllerYes
    B_PowerManagementYes

    BEAGLEBONE – KIT

    The Beaglebone-Kit comes as complete kit and runs out of the box using different components. It consists of an ARM Cortex-A8 microcontroller on a Beaglebone board, a Falcon 2 board, a wire and a Hermes 3 connector.

    Complete Kit

    BBB_FN2_HM3_2000x2000

    Identifier
    K_Beaglebone

    Product number
    303011

    BEAGLEBONE – SINGLE COMPONENTS

    The Beaglebone-Kit comes as complete kit and runs out of the box using different components. For a deeper understanding of the single components they are listed below. All single components can be ordered separately.

    MCU

    Display specific reference board

    Wire

    Display connector board

    B_HM3.0

    Board
    Beaglebone black

    Board
    Falcon 2.1 (Plastic Logic design)

    Wire
    40-pin (Plastic Logic assembly)

    Board
    Hermes 3 (Plastic Logic design)

    Processor
    ARM Cortex-A8

    Design
    Contains EPD controller, power management and RAM management

    Design
    Wire between
    Display specific reference board
    and Display connector board

    Design
    Display connector

    Operating system
    Linux

    EPD controller
    EPSON S1D13524

    Data exchange and extensions
    USB / Ethernet / Serial / SD

    Identifier
    M_BBB (black)

    Identifier
    C_FN2.1

    Identifier
    W_40P

    Identifier
    B_HM3.0

    Product number (black)
    301004

    Product number
    301054

    Product number
    301053

    Product number
    301021

    Function

    C_SystemProcessor

    Function

    B_EPDControllerYes
    B_PowerManagementYes

    i.MX6 – KIT

    The i.MX6-Kit comes as complete kit and runs out of the box using different components. It consists of a MCU board i.MX6SoloLite, a Hummingbird Z3.4 board, a wire and a Hermes 3 board. The MCU ARM Cortex-A9 is a system-on-chip (SoC) solution with the EPD controller integrated.

    Complete Kit

    i.MX6_HBZ3.4_HM3_2000x2000

    Identifier
    K_i.MX6

    Product number
    303012

    i.MX6 – SINGLE COMPONENTS

    The i.MX6-Kit comes as complete kit and runs out of the box using different components. For a deeper understanding of the single components they are listed below. All single components can be ordered separately.

    MCU

    Display specific reference board

    Wire

    Display connector board

    B_HM3.0

    Board
    i.MX6SoloLite EVK

    Board
    HBZ3.4 (Plastic Logic design)

    Wire
    40-pin (Plastic Logic assembly)

    Board
    Hermes 3 (Plastic Logic design)

    Processor & EPD controller
    i.MX6SoloLite

    Design
    Contains multiple display power management and front light support

    Design
    Wire between
    Display specific reference board
    and Display connector board

    Design
    Display connector

    Operating system
    Linux

    Data exchange and extensions
    USB / Ethernet / Serial / SD

    Identifier
    M_i.MX6

    Identifier
    C_HBZ3.4

    Identifier
    W_40P

    Identifier
    B_HM3.0

    Product number
    301028

    Product number
    301038

    Product number
    301053

    Product number
    301021

    Function

    C_SystemProcessor
    B_EPDControllerYes

    Function

    B_PowerManagementYes

    How to choose the best suitable evaluation kit approach? Get an overview about all evaluation kits for the drivers-only platform.

    Get all details of the 10.7″ display.